Ibase IB827 Manuel d'utilisateur télécharger pdf (Page 46)

BIOS SETUP

IB827 User’s Manual

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the

system use INT#, thus all installed PCI cards must be set to this value.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Installed

No ITEM HELP

Init Display First

PCI Slot Menu Level

Reset Configuration Data

Disabled

Select Yes if you are

Resources Controlled By

Auto (ESCD) using a Plug and Play

capable operating

system Select No if

you need the BIOS to

configure non-boot

devices

IRQ Resources

Press Enter

DMA Resource

Press Ente

PCI/VGA Palette Snoop

Disabled

**PCI Express relative items**

Maximum Payload Size

128

PNP OS Install

Enable the PNP OS Install option if it is supported by the

operating system installed. The default value is No.

Init Display First

The default setting is PCI Card.

Reset Configuration Data

This field allows you to determine whether to reset the configuration

data or not. The default value is Disabled.

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices

with the use of a PnP operating system such as Windows 95.

PCI/VGA Palette Snoop

Some non-standard VGA display cards may not show colors properly.

This field allows you to set whether or not MPEG ISA/VESA VGA

cards can work with PCI/VGA. When this field is enabled, a PCI/VGA

can work with an MPEG ISA/VESA VGA card. When this field is

disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

Maximum Payload Size

The default setting of the PCI Express Maximum Payload Size is 128.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 65 66

Commentaires sur ces manuels

Pas de commentaire

Ibase IB827 Manuel d'utilisateur Page 46

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Ibase IB827